PV Powered 2500 Guia de Instalação descarregar pdf (Página 13)

SMA Technologie AG Installation Requirements

Installation Guide SB25_30-11:SE0307 Page 13

5 Installation Requirements

Check that all of the requirements listed below are met before installing and

commissioning the Sunny Boy.

5.1 Installation Location Requirements

The Sunny Boy SB 2500 weighs 30 kg, the Sunny Boy SB 3000

weighs 32 kg. Take this weight into account when choosing the

installation location and method of installation.

The Sunny Boy is designed for outdoor installation and should be

installed in a place where it is not exposed to direct sunlight. An

increased ambient temperature can reduce the yield of the PV

system. Installing the unit in badly ventilated, warm indoor locations

may also reduce yield.

The Sunny Boy is designed to be mounted on a vertical wall. However, if absolutely

necessary, the Sunny Boy can be installed tilted back at a maximum angle of 45°.

Vertical installation at eye-level is preferable for an optimum energy yield and maximum

operational comfort. If installing the unit outdoors, make sure that it is not slanting

forwards.

We advise against installing the unit in a horizontal position outdoors.

The ambient temperature must not be outside the -25 °C to

+60 °C range.

30 / 32 kg

Install the inverter vertically or

tilting backward.

Never install the inverter horizontally

or so that it tilts forward.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Sem comentários

PV Powered 2500 Guia de Instalação Página 13