PV Powered 5200 Manual descarregar pdf (Página 33)

Communication and Monitoring

8.2.2 RS485 Communication

RS485 is generally for at most 32 inverters communication at the same time. But the length of

communication wire should be≤1200m. You can read and analyse data by PC if the system is equipped

with Solar-Log200/500/1000. Please refer to Solar-Log200/500/1000 manual for more information.

Figure 23 RS-485 jack

Two types of cable must be prepared before using Solar-Log to monitor mult-inverters.

The communication cable between inverter and inverter:

1. Prepare two 8-PIN RJ45 modular plug, hold the RJ45 modular plug with the 'clip' on the bottom,

the 'opening' (where you insert the cable) facing you, the order number is 1 to 8 from left to right,

as figure 24.

Figure 24

2. Use a length of communication cable, then push the 8 color wires into the modular plug follow the

same order as below.

orange white

orange

green white

blue

blue white

green

brown white

brown

3. Then put the both ends of communication cable into the communication ports of inverter respectively.

If there are N inverters, need N-1 this communication cable.

G/ GB/ Br/BrO/ O B

1234

T-568B

5678

RJ-45 Plug

Pin 1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Sem comentários

PV Powered 5200 Manual Página 33