PV Powered PVP1800 Especificações descarregar pdf (Página 15)

PV Powered LLC 14 11-18-28-704

5. Connect negative DC leads directly to the negative terminal on the power

distribution board.

6. Connect the ground wire(s) to the ground lug.

7. Confirm that the DC disconnect is turned off and remove the material from the

array. With a voltmeter, check the PV array positive leads and confirm that the

voltage is positive when referenced to the negative leads. The reading should

match your series Voc total.

Figure 15: DC Wiring

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Sem comentários

PV Powered PVP1800 Especificações Página 15