PV Powered 3000 Manual de Instalação descarregar pdf (Página 17)

SMA Solar Technology AG Mounting

Installation Manual SB25_30-IA-IEN115050 17

• The connection area must point downward.

• Never mount the device with a forward tilt.

• Never mount the device with a sideways tilt.

• Do not mount horizontally.

• Install at eye level in order to allow operating states to be read at all times.

• To ensure optimal operation, the ambient temperature should be below 40°C.

• Do not expose the inverter to direct solar irradiation as this can cause excessive heating and

thus power reduction.

• In a living area, do not mount the unit on plasterboard walls (or similar) in order to avoid audible

vibrations. When in use, the inverter emits noises which may be perceived as a nuisance in a

living area.

• Observe the minimum clearances to walls, other

inverters or objects as shown in the diagram in

order to ensure sufficient heat dissipation and

sufficient space for removing the Electronic Solar

Switch.

Multiple inverters installed in areas with high ambient temperatures

If necessary, increase the clearance spaces and make sure there is enough fresh-air supply

to ensure sufficient cooling of the inverters.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Sem comentários

PV Powered 3000 Manual de Instalação Página 17