PV Powered 3000 Manual de Instalação descarregar pdf (Página 31)

SMA Solar Technology AG Electrical Connection

Installation Manual SB25_30-IA-IEN115050 31

4. Push the cable gland toward the thread and fasten to a torque of 2 Nm.

☑ The DC connectors are assembled and can now be connected to the inverter as described in

Section 5.4.4 "Connecting the PV Array (DC)" (page33).

☑ If the conductors are not visible in the

hollow cavity, the cable is not in the correct

position.

• Loosen the clamping bracket. For this

purpose, use a screwdriver with a blade

width of 3.5 mm.

• Remove the cable and start again from

step 1.

Result Measure

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Sem comentários

PV Powered 3000 Manual de Instalação Página 31